Hot Tubs
Beachcomber 570 LEEP -6-7 Person Hot Tub
Description
- Seating Capacity 7 Person
- Dimensions 80 x 88 x 38 inches
- Weight (Dry/Filled) 650lbs / 3670lbs
- Water Capacity 1370 Litres
- Jets UP TO 94 Jets
Beachcomber Enhanced Features
Beachcomber LEEP ™ Features
BEACHCOMBER GUARANTEE
Peace of mind that your new hot tub will perform as promised is backed by an industry exclusive Guarantee, and not a Limited Warranty!
PERMA-SEAL™ FOUNDATION
The full thermoplastics foundation encapsulating the bottom of the hot tub seals out ground elements like water, moisture and air, and prevents critter penetration.
ALL-ACTIVE SEATING
All hot tub hydro-massage seats operate at the same time with the press of a single button, allowing for a shared hydrotherapy
UL CERTIFIED HEATSHIELD™ COVER
The HEATSHIELD™ Cover creates a vacuum seal around the entire perimeter of the hot tub lip to prevent heat loss.
BODY CONTOURED ERGONOMIC DESIGN
Hand-sculpted, ergonomically designed seating to support the contours of your body for comfort and relaxation.
ALL-MOTION HYDROTHERAPY
Full body coverage delivering pressurized streams that pulsate, oscillate and knead, with the fusion of injected air and water to actively massage targeted areas for pain relief and relaxation.
ENERGY SAVER MANAGEMENT SYSTEM (ESMS)
Complex network of energy management functions enabling the world’s lowest energy consuming hot tubs with Digital Temperature Control.
Beachcomber Ergocomfort™ Seating
Specifications
|
Beachcomber Hot Tub |
 |
| Seat Capacity | 6 |
| Dimensions | 80 x 88 x 38” / 203 x 224 x 97cm |
| FlexJets™ | 112 |
| Electrical | 240 Volt; 50 Amp, 6/3 Wire GFCI Protector Circuit |
| Dry weight | 650 lbs / 295 kgs |
| Filled weight | 3670 lbs / 1665 kgs |
| Water capacity | 362 US gallons / 1370 litres / 301 UK gallons |
| Certifications | Electrical Testing Labs proof of product compliance to North American Safety Standards (ETL) and health, safety, and environmental protection standards Conformitè Europëenne mark (CE) |
|
Heatshield™ |
Hot Tub Cover |
| Material | 26 oz Marine-grade Vinyl Skin |
| Dimensions | 80″ x 88″ Rectangle |
| Slope | 4” > 3” Taper |
| Foam density | 1.5 lbs per square inch |
| R Factor | Up to R14 insulation rating |
| Support | 20 Gauge Aluminum Reinforced Centre |
| Liner Material | Krevlon™ |
| Certifications | Underwriters Laboratories of Canada (UL), and American Society for Testing & Materials Standard (ASTM) Certified |
Exterior Dimensions
Seating depth
*Seat depths are from the top of the tub lip down to the lowest point in the seat*
**All dimensions are approximate and vary from hot tub to hot tub**
